ATIKA ASP 6 N-003 - Bedienungsanleitung PDF herunterladen (Seite 16)

Problem possible cause remedy

Logs are not being split properly

(insufficient splitting performance)

⇒ The log is not positioned correctly

⇒ The log exceeds the maximum

dimensions or the wood is too hard for

the performance of the machine

⇒ The splitting wedge is not working

properly

⇒ Oil leak

⇒ Hydraulic pressure too low

⇒ Incorrect connecting lead (longer than

10 m or too small cable cross-section)

⇒ Reposition the log correctly

⇒ Cut the log to the required dimensions

⇒ Sharpen the splitting wedge, and check

for any burrs or notches

⇒ Place a sheet of cardboard under the

log splitter in order to locate the leak.

To correct the problem, refer to the

manufacturer or other approved

service centre.

⇒ Check the oil level and add more oil if

necessary.

If the problem cannot be rectified, refer

to the manufacturer or other approved

service centre.

⇒ Use the correct connecting lead

Log ram travels out jerkily or under heavy

vibration

⇒ Air in the circuit ⇒ Open the bleed screw

⇒ Check the oil level and add more oil if

necessary.

If the problem cannot be rectified, refer

to the manufacturer or other approved

service centre.

Log ram will not move out

⇒ Hydraulic pump defective ⇒ To correct the problem, refer to the

manufacturer or other approved

service centre.

Motor will not start

⇒ No electrical power

⇒ Connection cable defective

⇒ Electric motor defective

⇒ Check the fuse (16 A).

⇒ Replace the connection cable or have

it checked by an electrician.

⇒ To correct the problem, refer to the

manufacturer or other approved

service centre.

Oil leak at the dipstick

⇒ Oil seal at the dipstick not sealing ⇒ Replace the oil seal.

Splitting force 40 kN (4 t)

Log length 370 mm

Log diameter 50 – 250 mm

Stroke 300 mm

Piston rod diameter 30 mm

Hydraulic oil (max.) 2.6 litres

Electric motor performance (power consumption) P

= 1500 W ( S1-100 % )

Power supply 230 V ~ 50 Hz

Revolutions 2850 rpm

Dimensions Length 1115 x Width 320 x Height 470 mm

Weight 45 kg

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

ATIKA ASP 6 N-003 - Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Holzspalter ATIKA ASP 6 N-003 -