ATIKA KSG 220 A - Betriebsanleitung PDF herunterladen (Seite 13)

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using it,

by reading and understanding the operating instructions.

 Do not use the machine for unsuitable purposes (see

“Normal intended use”).

 Mount the machine on a non-skid and level ground.

 Avoid abnormal posture. Ensure that you have stand in a

secure standing position and maintain your balance at all

times.

 Be attentive. Be careful what you do. Behave sensibly

when working. Do not use the device when you are tired or

under the influence of drugs, alcohol or medicaments. One

moment of carelessness when using the device can result

in serious injuries.

 Wear suitable work clothes!

− do not wear loose-fitting clothes or jewellery; they can

catch in moving parts.

− Gloves and slip-proof shoes

− wear a hair-net if your hair is long

 Wear protective clothing:

− safety goggles

− ear protection (Sound intensity level at workplace can

exceed 85 dB (A))

− dust mask

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Take into consideration environmental influences:

− Do not use the device in moist or wet ambience.

− Do not expose the chain sharpener to rain.

− Do only work with sufficient visibility conditions. Provide

for good illumination.

 Never leave the operational machine unattended.

 Persons under the age of 18 must not operate the device.

 Keep other persons away.

Do not allow other persons, especially children, to touch

the tool or cable.

Keep them away from your working area.

 Do not overload the machine! You work better and safer in

the given performance range.

 Only operate the machine with complete and correctly

attached safety equipment and do not alter anything on

the machine that could impair the safety.

 Do not use any grinding wheels which do not comply with

the indicated characteristics of this instruction manual.

The use of other tools and other accessories may

present a risk of injury to you.

 Worn and defective grinding wheels (cracks, imbalance,

chipping, etc.) must be replaced immediately.

 Ensure a firm seat of the grinding wheel.

 Switch the machine off and remove the mains plug from

the socket when

− carrying out repair works

− maintenance and cleaning

− Elimination of failures (including freeing a blocked

grinding wheel)

− Storage

− Leaving the chain sharpener (even in case of short-

term interruptions)

 Caution! Grinding wheel runs after! Do not brake the

grinding wheel by hand or using lateral pressure.

 Maintain your chain sharpener with care:

− Keep the device free of oil and grease.

− Follow the maintenance instructions and the

instructions for tool exchange.

 Check the machine for possible damage:

− Before continuing to use the machine, the protective

devices must be inspected to ensure that they work

perfectly and with their intended function.

− Check whether the movable parts function perfectly

and do not stick or whether the parts are damaged. All

parts must be properly mounted and all conditions met

to ensure the flawless operation of the chain sharpener.

− Unless otherwise indicated in the operating instructions,

damaged safety devices and parts must be properly

repaired or replaced by an authorised workshop (or by

the manufacturer).

− Damaged or illegible safety warning labels should be

replaced immediately.

 Do not allow any tool key to be plugged in!

Before switching on, check always that wrenches and

adjusting tools are removed.

 Store unused equipment in a dry, locked place out of the

reach of children.

Electrical safety

 Design of the connection cable according to IEC 60245

(H 07 RN-F) with a core cross-profile section of at least

- 1.5 mm² for cable lengths up to 25 m

 Long and thin connection lines result in a potential drop.

The motor does not reach any longer its maximal power;

the function of the device is reduced.

 Plugs and coupler outlets on connection cables must be

made of rubber, non-rigid PVC or other thermoplastic

material of same mechanical stability or be covered with

this material.

 The connector of the connection cable must be splash-

proof.

 When running the connection line observe that it does not

interfere, is not squeezed, bended and the plug connection

does not get wet.

 Wind off completely the cable when using a cable drum.

 Do not use the cable for purposes for which it is not meant.

Protect the cable against heat, oil and sharp edges. Do

not use the cable to pull the plug from the socket.

 Protect yourself against electric shocks. Avoid touching

earthed parts with your body (e.g. pipes, heating

apparatus, cookers, fridges etc.).

 Regularly check the extension cables and replace them if

they are damaged.

 Do not use any defective connection cables.

 Do not set up any provisional electrical connections.

 Never bypass protective devices or deactivate them.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

ATIKA KSG 220 A - Betriebsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein ATIKA KSG 220 A -